Unipulse Australia - Homogeniser Sales, Homogeniser Rentals, Laboratory Homogeniser Unipulse Australia - Homogeniser Sales, Homogeniser Rentals, Laboratory Homogeniser
 

Unipulse Home Page
New Homogeniser Equipment
Secondhand Homogeniser Equipment
Rentals
Enquiries

UNIPULSE AUSTRALIA  
Factory 1, 15 Commercial Drive,
Lynbrook, Victoria 3975
Phone:
+613 8787 8811
Fax:
+613 8787 8822
New Equipment  

High-pressure pumps
Our new machine HLP series

Unipulse Pty Ltd is the australian representitive for HST Germany. A team with decades of experience in construction, service and sales of high-pressure homogenisers ensures an excellent level of expertise and competence.

Advantages of our homogenisers:
  • Quality products "Made in Germany"
  • Very good price/performance ratio
  • Energy efficient
  • Small sizes of pumps
  • Low noise
  • Flexible equipment





Description
The HLP 1.2 model is a high-pressure piston pump in double-piston construction. The pistons are arranged horizontally.

The cylinder block consists of high-alloyed, forged and corrosion-resistant stainless steel and is characterised by the use of a minimum of parts subject to wear. The high-quality surface finish and the avoidance of dead spaces ensure a higher CIP standard. Due to the multitude of cylinder block designs, the most diverse products can be processed both septically as well as aseptically .

Datasheet

Machine type Max. pressure Max. capacities
HLP1.2 bar L/h
Ball valves

For abrasive and highly viscous products

Machine type Max. pressure Max. capacities
HLP1.2 bar L/h
200K 200 200
250K 250 160
400K 400 125
700K 700 60

^Top






Description
The HLP 1.3 model is a high-pressure piston pump in treble-piston construction. The pistons are arranged horizontally.

The cylinder block consists of high-alloyed, forged and corrosion-resistant stainless steel and is characterised by the use of a minimum of parts subject to wear. A higher CIP standard is ensured by the high-quality surface and the avoidance of dead spaces. Due to the multitude of cylinder block designs, the most diverse products can be processed both septically as well as aseptically .

Datasheet

Mushroom valves

For only slightly abrasive products with low viscosity

Machine type Max. pressure Max. capacities
HLP1.3 bar L/h
200T 200 260
250T 250 230
400T 250 170


Ball valves

For abrasive and highly viscous products

Machine type Max. pressure Max. capacities
HLP1.3 bar L/h
200K 200 200
250K 250 160
400K 400 125
700K 700 60

^Top






Description
The HLP 2 model is a high-pressure piston pump in treble-piston construction. The pistons are arranged horizontally.

The cylinder block consists of high-alloyed, forged and corrosion-resistant stainless steel and is characterised by the use of a minimum of parts subject to wear. The high-quality surface finish and the avoidance of dead spaces ensure a higher CIP standard. Due to the multitude of cylinder block designs, the most diverse products can be processed both septically as well as aseptically .

Datasheet

Mushroom valves

For only slightly abrasive products with low viscosity

Machine type Max. pressure Max. capacities
HLP2 bar L/h
100T 100 5.500
200T 200 4.500
250T 250 3.500
350T 350 2.200
550T 550 1.500
Ball valves

For abrasive and highly viscous products

Machine type Max. pressure Max. capacities
HLP2 bar L/h
100K 100 4.000
200K 200 3.200
250K 250 2.200
350K 350 1.700
550K 550 1.000
750K 750 700

^Top






Description
The HLP 3 model is a high-pressure piston pump in treble-piston construction. The pistons are arranged horizontally.

The cylinder block consists of high-alloyed, forged and corrosion-resistant stainless steel and is characterised by the use of a minimum of parts subject to wear. The high-quality surface finish and the avoidance of dead spaces ensure a higher CIP standard. Due to the multitude of cylinder block designs, the most diverse products can be processed both septically as well as aseptically .

Datasheet

Mushroom valves

For only slightly abrasive products with low viscosity

Machine type Max. pressure Max. capacities
HLP3 bar L/h
100T 100 12.500
200T 200 11.000
250T 250 7.500
350T 350 6.000
550T 500 3.000
Ball valves

For abrasive and highly viscous products

Machine type Max. pressure Max. capacities
HLP3 bar L/h
100K 100 9.500
200K 200 7.000
350K 350 4.500
550K 550 2.000
700K 700 1.500

^Top






Description
The HLP 4 model is a high-pressure piston pump in treble-piston construction. The pistons are arranged horizontally.

The cylinder block consists of high-alloyed, forged and corrosion-resistant stainless steel and is characterised by the use of a minimum of parts subject to wear. The high-quality surface finish and the avoidance of dead spaces ensure a higher CIP standard. Due to the multitude of cylinder block designs, the most diverse products can be processed both septically as well as aseptically .

Datasheet

Mushroom valves

For only slightly abrasive products with low viscosity

Machine type Max. pressure Max. capacities
HLP4 bar L/h
150T 150 24.000
200T 200 20.000
250T 250 15.000
300T 300 13.500
350T 350 15.000
550T 550 8.000
Ball valves

For abrasive and highly viscous

Machine type Max. pressure Max. capacities
HLP4 bar L/h
100K 100 15.000
200K 200 14.000
250K 250 11.000
300K 300 10.000
350K 350 9.000
550K 550 6.000

^Top






Description
The HLP 5 model is a high-pressure piston pump. The five pistons are arranged horizontally.

The cylinder block consists of high-alloyed, forged and corrosion-resistant stainless steel and is characterised by the use of a minimum of parts subject to wear. The high-quality surface finish and the avoidance of dead spaces ensure a higher CIP standard. Due to the multitude of cylinder block designs, the most diverse products can be processed both septically as well as aseptically .

Datasheet

Mushroom valves

For only slightly abrasive products with low viscosity

Machine type Max. pressure Max. capacities
HLP5 bar L/h
150T 150 34.000
200T 200 28.000
250T 250 21.000
350T 350 16.000
550T 550 11.000
Ball valves

For abrasive and highly viscous

Machine type Max. pressure Max. capacities
HLP5 bar L/h
150K 150 24.500
200K 200 24.000
250K 250 18.000
350K 350 15.000
550K 550 10.000

^Top






Description
The HLP 6 model is a high-pressure piston pump. The six pistons are arranged horizontally.

The cylinder block consists of high-alloyed, forged and corrosion-resistant stainless steel and is characterised by the use of a minimum of parts subject to wear. The high-quality surface finish and the avoidance of dead spaces ensure a higher CIP standard. Due to the multitude of cylinder block designs, the most diverse products can be processed both septically as well as aseptically .

Datasheet

Mushroom valves

For only slightly abrasive products with low viscosity

Machine type Max. pressure Max. capacities
HL6 bar L/h
150T 150 43.000
200T 200 39.000
250T 250 29.000
350T 350 23.000
550T 550 15.000
Ball valves

For abrasive and highly viscous products

Machine type Max. pressure Max. capacities
HL6 bar L/h
150K 150 30.000
200K 200 27.000
250K 250 21.000
350K 350 17.000
550K 550 11.000

^Top






Description
The HLP 7 model is a high-pressure piston pump. The ten pistons are arranged horizontally.

The cylinder block consists of high-alloyed, forged and corrosion-resistant stainless steel and is characterised by the use of a minimum of parts subject to wear. The high-quality surface finish and the avoidance of dead spaces ensure a higher CIP standard. Due to the multitude of cylinder block designs, the most diverse products can be processed both septically as well as aseptically .

Datasheet

Mushroom valves

For only slightly abrasive products with low viscosity

Machine type Max. pressure Max. capacities
HL7 bar L/h
150T 150 68.000
200T 200 56.000
250T 250 42.000
350T 350 32.000
550T 550 22.000
Ball valves

For abrasive and highly viscous products

Machine type Max. pressure Max. capacities
HL7 bar L/h
150K 150 49.000
200K 200 48.000
250K 250 36.000
350K 350 30.000
550K 550 20.000

^Top